wohnung modern gestalten

you will be surprised at the level of creativity you can achieve by thinking slightly out-of-the box. these ideas are to help you create nifty storage options and furniture pieces that not only accentuate the aesthetic appeal of your home, but also fill unused spaces and ensure your surroundings are free from clutter. thus your home is always neat and organized, which makes you feel good, while creating favorable impression on guests. this is 5 ikea side table makeover ideas for decor lovers by simphome.com 1. diy project: copper tubing side table the copper tubing should be cut down to 4 legs,

but make sure you spray your mdf with white first. use masking tape for the side you dont wish to paint. spray a shade of your choice on the other and let it dry. afterwards mask this side and spray the opposite side before repeating on the other side of the board. clamp the board down to the table and fix the tubing with epoxy glue. 2. convert the ikea frosta into the perfect laptop desk position bottom 3 legs, but ensure the long end is touching the floor for better stability.

drill two holes in the sides of the bottom three legs and fasten screws in holes. now you have a couple of bits, as well as the top and legs. position top bit on top of legs at desired height, drill holes at the side of the legs into the middle stem fixed to the table top, and finally fasten screws in the holes. 3. log slice table get a sturdy pice of log to cut a 5-inch slice for the table top by using a chain saw. use a belt sander to level out the surface and smoothen the roughness. you will also need an orbital sander beginning with 80 grit,

because the belt sander leaves blemishes. ending with 200 is adequate for a good polish. use 3 coats of polyacrylic to the top for protection from nicks and clear lacquer spray on sides. attach logs to the legs of an ikea marius stool and you are done! 4. upcycled old door: now it’s a side table the center panel of a leftover door comes in handy to fashion a side table. strip off the paint, cut a rout piece from another section to fill in the side of the table top, and glue it into place.

create the sides and back of the box by piecing together pieces from the sides of the door. one solid piece serving as the bottom. use a spare two-by-four cut down to match the thickness of the door to make the legs. apply clear varnish on the box and 4 coats of eco-friendly yellow paint on the legs. 5. diy project: ikea bedside chair the chair doubles as a handy storage option as well. take the seat off the chair, attach two piece of the drawer slides to the left and right,

and make them flush with the top edge of the sides. screw the front of the drawer slides into the chair legs with one screw on each side and use screws in the back too. slide the drawers into the space. re-attach the seat once you are done. follow instructions for attaching the sconce and light bulb. that's it for now. come back again next time with more home, kitchen makeover and decorating ideas. like this video, comment it, or better yet share it with everyone in your social circle.

don't forget to press subscribe button if this channel is new to you. see you again later and thanks for watching

Subscribe to receive free email updates: