wohnzimmertür streichen

first of all removing the door handle and the lock grind everything with 120 sandpaper now the ugly plywood will be remove because the plywood was nailed, now all the nails have to be removed with a wood chisel residues of varnish and filler are removed also grind this side with 120 sandpaper the hard to reach places i grind with a grinding fleece dust all good with the circular saw, the filling will be removed

fill in all the cracks and holes with acrylic i close larger cracks after the filler is hard, is sanded again clean the door thoroughly before painting followed by two coats of varnish, for saving time, i show only the first one type of foam pad for the glass pane dimensions for the new framework select suitable profile and cut mitred insert the disc with suitable adhesive

with small nails the frame is mounted also on this page a bit filler is required thoroughly grind clean, taping and painting and again two coats of varnish once everything is dry can turn the new doorknob some acrylic for the gap between wood and glass done thank you for watching

Subscribe to receive free email updates: